Metallized Film is used for high barrier Flexible, packaging, metallic yarn, sequins for textiles, decoratives, etc. Metallized BOPP films are used for flexible packaging, gift wraps and decoaratives.

Type Description Standard Thickness* (μ) USP Application
J200M0 Normal density metallization on plain side and other side plain 8,9,10,12,23 μ
  • Standard Density
  • Standard Metal Bond Strength
  • Standard Water Vapour and Gas Barrier properties
  • Good Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging application, especially for higher gloss and barrier properties.
J200M4 High density metallization on plain surface with plasma treatment and other side plain. 12 μ
  • High Density
  • Standard Metal Bond Strength
  • High Water Vapour and Gas Barrier properties
  • Good Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging application, especially for high barrier properties.
J201M0 Normal density metallization on Corona side and other side plain 7,8,9,10,12,15,19,23,36,50 μ
  • Standard Density
  • Improved Metal Bond Strength
  • Standard Water Vapor and Gas Barrier properties
  • Good Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging application, especially for higher gloss and barrier properties.
J201M1 Normal density Metallized on plain surface and other side corona treated 8,9,10,12,15,23,36 μ
  • Standard Density
  • Standard Metal Bond Strength
  • Standard Water Vapor and Gas Barrier properties
  • Good for Printing and Lamination
  • Excellent Machinability
Suitable for flexible packaging application, especially for higher gloss and barrier properties.
J202M0 High density Metallization on corona surface and other side plain 8,10,12 μ
  • Average Density
  • Standard Metal Bond Strength
  • Moderate Water Vapour and Gas Barrier properties
  • Standard Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging application, especially for higher gloss and barrier properties.
J202M1 High density Metallised on plain surface with plasma and other side corona treated. 10,12,36 μ
  • Average Density
  • Standard Metal Bond Strength
  • Moderate Water Vapour and Gas Barrier properties
  • Standard Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging application where high barrier is required
J202M4 High density Metallization on corona surface and other side plain 8,10,12 μ
  • High Density
  • Standard Metal Bond Strength
  • Good Water Vapour and Gas Barrier properties
  • Good Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging application, especially for high barrier properties requirement
J221M0 Normal density metallization on pre-coated co polyester side and other side plain 8,10,12,23 μ
  • Standard Density
  • Good Metal Bond Strength
  • Standard Water Vapour and Gas Barrier properties
  • Standard Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging application where good barrier and high metal bond is required, film is not recommended for liquid / sterilization application
J221M4 High density metallization on pre-coated co polyester side and other side plain 8,10,12 μ
  • High Density
  • Good Metal Bond Strength
  • Good Water Vapour and Gas Barrier properties
  • Standard Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging application where high barrier and high metal bond is required
J222M1 Normal density Metallised on pre-coated co polyester surface and other side corona treated. 10,12,15 μ
  • Standard Density
  • Good Metal Bond Strength
  • Standard Water Vapour and Gas Barrier properties
  • Corona side good for Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging application where high barrier and high metal bond is required
J222M4 High density Metallized on pre-coated co polyester surface and other side corona treated 10,12 μ
  • High Density
  • Good Metal Bond Strength
  • Good Water Vapour and Gas Barrier properties
  • Corona side Good for Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging application where high barrier and high metal bond is required
J222M5 Ultra high density metallization on pre-coated co polyester side and other side corona 12 μ
  • High Density
  • Good Metal Bond Strength
  • Excellent Water Vapour and Gas Barrier properties
  • Good Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging application where high barrier and high metal bond is required
J231M3 Normal density Metallised on plain surface and other side chemically pre-treated 10,12,23 μ
  • Standard Density
  • Standard Metal Bond Strength
  • Standard Water Vapour and Gas Barrier properties
  • Good for Printing and Lamination
Suitable for flexible packaging application, chemical treated side is suitable for printing
J231M4 High density Metallised on plain surface and other side chemically pre-treated 10,12,23 μ
  • High Density
  • Standard Metal Bond Strength
  • Good Water Vapour and Gas Barrier properties
  • Good for printing and Lamination
Suitable for flexible packaging application, chemical treated side is suitable for printing.
J232M3 Normal density Metallised on corona surface and other side chemically pre-treated. 10,12 μ
  • Standard Density
  • Standard Metal Bond Strength
  • Standard Water Vapour and Gas Barrier properties
  • Good for Printing and Lamination
Suitable for flexible packaging application, chemical treated side is suitable for printing
J232M4 High density Metallised on corona surface and other side chemically pre-treated. 10,12 μ
  • High Density
  • Standard Metal Bond Strength
  • Standard Water Vapour and Gas Barrier properties
  • Good for printing and Lamination
Suitable for flexible packaging application, chemical treated side is suitable for printing
J233M3 Normal density Metallised on plain surface with Plasma and other side chemically pre-treated. 8,10,12,15 μ
  • Standard Density
  • Standard Metal Bond Strength
  • Standard Water Vapour and Gas Barrier properties
  • Good for Printing with UV Curable Ink and Standard Lamination Bond Strength
Suitable for flexible packaging application, chemical treated side is good for surface printing with UV curable inks.
J234M3 Normal density Metallized on Corona surface and other side Chemically Pre-treated. 10,12,15 μ
  • Standard Density
  • Improved Metal Bond Strength
  • Standard Water Vapour and Gas Barrier properties
  • Good for printing with UV curable ink and Lamination
Suitable for flexible packaging application, Chemical treated side is good for surface printing with UV curable inks.
J261M0 Normal density Metallised on pre-coated chemical surface and other side plain. 10,12 μ
  • Standard Density
  • High Metal Bond Strength
  • Good Water Vapour and Gas Barrier properties
  • Standard Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging application where good barrier and high metal bond is required, film is recommended for liquid packaging application
J262M1 Normal density Metallised on pre-coated chemical surface and other side corona 10,12 μ
  • Standard Density
  • High Metal Bond Strength
  • Good Water Vapour and Gas Barrier properties
  • Good Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging application where good barrier and high metal bond is required. Film is suitable for hot fill application also.
J262M4 High densityx Metallized on pre-coated co polyester Surface and other side corona treated. 10,12 μ
  • High Density
  • High Metal Bond Strength
  • Good Water Vapour and Gas Barrier properties
  • Good Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging application where good barrier and high metal bond is required. Film is suitable for hot fill application also.
J262M5 High density Metallized on pre-coated co polyester Surface and other side corona treated 10,12 μ
  • High Density
  • High Metal Bond Strength
  • very Good Water Vapour and Gas Barrier properties
  • Good Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging application where good barrier and high metal bond is required. Film is suitable for hot fill application also.
J281M0 Normal density Metallization on chemical coated surface offer high metal adhesion performance. 12 μ
  • Standard Density
  • High Metal Bond Strength
  • Standard Water Vapour and Gas Barrier properties
  • Excellent Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging application where high metal bond is required. Film is suitable for hot fill applications
J281M5 High density Metallisation on pre-coated chemical surface and other side Non treated 12 μ
  • High Density
  • Excellent Metal Bond Strength
  • Excellent Water Vapour and Gas Barrier properties
  • Excellent Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging application where high barrier and high metal bond is required. Film is suitable for hot fill applications.
J450M0 Normal density Metallised on plain surface and other side plain. 12,13 μ
  • Standard density
  • Good Metal Bond Strength
  • High Gloss
  • Excellent Dimensional/Thermal Stability.
  • Excellent Machinability
Specially designed for Metallic yarn application.
J500MO Normal density Metallised on plain surface and other side plain. 23,50,100,110,125,135,140,150 μ
  • Standard Density
  • Standard Metal Bond Strength
  • High Gloss
  • Standard Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging, glitter powder application, especially for higher gloss
J530M0 Normal density Metallised on plain surface and other side plain. 50,150 μ
  • Standard Density
  • Standard Metal Bond Strength
  • Standard Lamination Bond Strength
  • Excellent Machinability
Suitable for flexible packaging, glitter powder application, especially for higher gloss
J700M0 Normal density Metallized on plain surface and other side plain 12,23 μ
  • Standard Density
  • Isotropic Mechanical property
  • High Thermal Stability and Good Machinability.
  • Standard Metal Bond Strength
  • Good Water Vapour and Gas Barrier properties
Suitable for flexible packaging application
J701M0 Normal density Metallized on corona treated surface and other side plain. 12,23 μ
  • Standard Density
  • Isotropic Mechanical property
  • High Thermal Stability and good Machinability.
  • Improved Metal Bond Strength
  • Good Water Vapour and Gas Barrier properties
Suitable for flexible packaging application,
J950MO Normal density metallised direct matte polyester film with medium surface gloss. 12,23,36,50 μ
  • Standard density
  • Medium surface gloss
  • Good dimensional / thermal stability.
  • Excellent Machinability
labels and other industrial application.
J952M1 Normal density Metallisation on translucent direct matte polyester film and other side corona treated 12,23,36,50 μ
  • Standard Density
  • Excellent Dimensional / Thermal Stability.
  • Excellent Machinability
  • Suitable for Printing
labels and other industrial application.
J951M0 Normal density Metallised direct matte one side metallised and other side chemically coated. 12 μ
  • Standard Density
  • Good Dimensional / Thermal Stability.
  • Excellent Machinability
  • Suitable for Printing & Lamination
labels and other industrial application.
Type Description Standard Thickness* (μ) USP Application
H1-MD One Side Metallised, Other Side Heat Sealable OPP Film for use in Single / Two Ply Packaging Structure. The film exhibits excellent water vapour and gas barrier properties. During metallisation process film is treated with plasma for improving metal adhesion and barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives. The untreated heatsealable side exhibits excellent hot-tack and seal strength 15,18,20,25,30,35,40 μ
  • Excellent Surface Gloss on Metallised Side
  • Very Good Water Vapour and Gas Barrier Properties
  • Excellent Adhesion of Aluminium
  • Very Good Anchorage of Lamination Adhesive on Metallised Side
  • Very Good Metal Bond Strength
  • Very Good Lamination Bond Strength
  • Excellent Machinability
  • Very Good Hot-Tack and Seal Strength
Heat Sealable Metallised Film for Single / Two Ply Packaging Structure
H1-LMD One Side Metallised, Other Side Low SIT Heat Sealable OPP Film for use in Single / Two Ply Packaging Structure for High Speed Packaging Machines. The film exhibits excellent water vapour and gas barrier properties. During metal isation process film is treated with plasma for improving metal adhesion and barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives.The untreated low SIT heat sealable side exhibits excellent hot-tack and seal strength. 15,18,20,25,30,35,40 μ
  • Low SIT Heat Sealable Skin with Excellent Hot-tack and Seal Strength
  • Excellent Surface Gloss on Metallised Side
  • Very Good Water Vapour and Gas Barrier Properties
  • Excellent Adhesion of Aluminium
  • Very Good Anchorage of Lamination Adhesive on Metallised Side
  • Very Good Metal Bond Strength
  • Very Good Lamination Bond Strength
  • Excellent Machinability
  • Very Good Hot-Tack and Seal Strength
Low SIT Heat Sealable Metallised Film for Single / Two Ply Packaging Structure for High Speed Packaging Application.
H1-UMD One Side Metallised, Other Side Ultra Low SIT Heat Sealable OPP Film for use in Single / Two Ply Packaging Structure for High Speed Packaging Machines. The film exhibits excellent water vapour and gas barrier properties. During metallisation process film is treated with plasma for improving metal adhesion and barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives. The untreated ultra low SIT heat sealable side exhibits excel ent hot-tack and seal strength. 15,18,20,25,30,35,40 μ
  • Ultra Low SIT Heat Sealable Skin with Excellent Hot-tack and Seal Strength
  • Excellent Surface Gloss on Metallised Side
  • Very Good Water Vapour and Gas Barrier Properties
  • Excellent Adhesion of Aluminium
  • Very Good Anchorage of Lamination Adhesive on Metallised Side
  • Very Good Metal Bond Strength
  • Very Good Lamination Bond Strength
  • Excellent Machinability
  • Very Good Hot-Tack and Seal Strength
Ultra Low SIT Heat Sealable Metallised Film for Single / Two Ply Packaging Structure for Very High Speed Packaging Applications
N1-MD One Side Metallised, Other Side Non Heat Sealable OPP Film for use in Lamination with Paper / Paper Board, Gift Wrapping and Decorative Application. The film exhibits excellent water vapour and gas barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with Inks during printing. 8,10,15,17,18,20,25 μ
  • Excellent Surface Gloss on Metallised Side
  • Very Good Water Vapour and Gas Barrier Properties
  • Excellent Adhesion of Aluminium
  • Very Good Anchorage of Inks on Metallised Side
  • Very Good Metal Bond Strength
  • Excellent Machinability
Lamination with Paper / Paper Board for Various Applications like Disposable Paper Plates, File Covers, Leaflats Etc. • Gift Wrapping Applications • Other Decorative Applications
N2-MD One Side Metallised, Other Side Corona Treated Non Heat Sealable OPP Film for use as Sandwich Layer in Three Ply Laminate Packaging Structure. The film exhibits excel ent water vapour and gas barrier properties. During metal isation process film is treated with plasma for enhancing metal adhesion and barrier properties. Metal ised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives. The corona treated non heat sealable side is also designed for excellent anchoring to lamination adhesive. 15,18,20,25,30,35,40,49 μ
  • Excellent Surface Gloss on Metallised Side
  • Excellent Water Vapour and Gas Barrier Properties
  • Excellent Adhesion of Aluminium
  • Very Good Anchorage of Lamination Adhesive on Metallised Side as wel as Corona Treated Side
  • Very Good Metal Bond Strength
  • Very Good Lamination Bond Strength
  • Excellent Machinability
Non Heat Sealable Metallised Film for Sandwich Layer in Three Ply Laminate Packaging Structure.
H1-MTD One Side Matt Metallised, Other Side Heat Sealable OPP Film is excellent water vapour and gas barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives. The untreated heat sealable side exhibits excellent hot-tack and seal strength. 18 μ
  • Designed to give Rich Matt finish appearance after Metallization
  • Excellent Surface Treatment Retention
  • Excellent Adhesion of Aluminium on Treated Side
  • Excellent Machinability
  • Excellent Mechanical Properties
  • Excellent Dimensional Stability
  • Very Good Hot-Tack and Seal Strength
Heat Sealable Matt Metallised Film For High Speed Packaging Application.
H1-PLD High Barrier White Cavitated One Side Metallised, Other Side Heat Sealable OPP Film for use in Single / Two Ply Packaging Structure. The film exhibits high water vapour and gas barrier properties. During metallisation process film is treated with plasma for improving metal adhesion and barrier properties. For better anchorage of inks & lamination adhesives, a primer or corona booster may be applied on metallised side before conversion. The untreated heat sealable side exhibits excellent hot-tack and seal strength. 25,30,35,38,40,50 μ
  • Very High Water Vapour and Gas Barrier Properties
  • Excellent Opacity
  • One Side Brilliant Pearlescent White Appearance and Other Side Brilliant Metallic Lustre
  • Very High Surface Gloss
  • Low Seal Initiation Temperature
  • Excellent Hot Tack and Heat Seal Strength
  • For better anchorage of inks & lamination adhesives, a primer or corona booster may be applied on metallised side before conversion
  • Excellent Machinability
  • Suitable for Various Printing / Lamination Machines
White Cavitated Heat Sealable Metallised Film for Single / Two Ply Printing Lamination Application (For Ice Cream Packaging, Labels, High Value Food Packaging Etc.)
H2-PLD White Cavitated One Side Metallised, Other Side treated OPP Film for use in Single / Two Ply Packaging Structure. During metallisation process film is treated with plasma for improving metal adhesion and barrier properties. For better nchorage of inks & lamination adhesives, a primer or corona booster is recommended to be applied on metallised side before conversion. Non metallised side is treated and exhibits low Coefficient of friction specifically designed for high speed packaging & wrap around labelling application. 30,35,38,40 μ
  • High Water Vapour and Gas Barrier Properties
  • Non metallised side is treated and exhibits low C.O.F.; facilitates Labelling and high speed packaging
  • One Side Brilliant Pearlescent White Appearance and Other Side Brilliant Metallic Lustre
  • For better anchorage of inks & lamination adhesives, a primer or corona booster is recommended to be applied on metallised side before conversion
  • Excellent Stiffness facilitated good Machinability
White Cavitated Heat Sealable Metallised Film For Wrap Around and Pressure Sensitive Label Application
H1-PDB High Barrier White Cavitated One Side Metallised, Other Side Heat Sealable OPP Film for use in Single /Two Ply Packaging Structure. The film exhibits very high water vapour and gas barrier properties. During metallisation process film is treated with plasma for improving metal adhesion and barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with Inks and lamination adhesives. The untreated heat sealable side exhibits excellent hot-tack and seal strength. 25,30,35,38,40,50 μ
  • Very High Water Vapour and Gas Barrier Properties
  • Excellent Opacity
  • One Side Brilliant Pearlicent White Appearance and Other Side Brilliant Metallic Lustre
  • Very High Surface Gloss
  • Low Seal Initiation Temperature
  • Excellent Hot Tack and Heat Seal Strength
  • Excellent Surface Treatment Retention on Metallised Side
  • Excellent Anchorage of Inks and Lamination Adhesive on Metallised Side
  • Excellent Machinability
  • Suitable for Various Printing / Lamination Machines
High Barrier White Cavitated Heat Sealable Metallise Ed Film For Single / Two Ply Printing Lamination Application ( for Ice Cream Packaging, Labels, High Value Food Packaging Etc).
H1-MDB High Barrier, One Side Metallized, Other Side Heat Sealable OPP Film for use in Single / Two Ply Packaging Structure. The film exhibits very high water vapor and gas barrier properties. During metallization process film is treated with plasma for improving metal adhesion and barrier properties. Metallized side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives. Untreated heat sealable side exhibits excellent hot-tack and seal strength. 15,18,20,25,30,35,40 μ
  • Very High Water Vapour and Gas Barrier Properties
  • Excellent Surface Gloss on Metallised Side
  • Excellent Adhesion of Aluminium on Treated Side
  • Very Good Anchorage of Lamination Adhesive on Metallised Side
  • Very Good Metal Bond Strength
  • Very Good Lamination Bond Strength
  • Excellent Machinability
  • Very Good Hot-Tack and Seal Strength
High Barrier Heat Sealable Metallised Film for Single / Two Ply Packaging Structure
H1-AMD One Side Metallised, Other Side High Heat Seal Strength Sealable OPP Film for Use in Single / Two Ply Packaging Structure. Speciality of this Film is Very High Sealing Strength and Outstanding Hot Tack Properties. Due to the Excellent Sealing Characteristics, this film can be considered as potential Replacement of Metallised CPP in Two Ply Laminating Structure. Also, this film exhibits excellent water vapour and gas barrier properties compare to Metallised CPP. During metallisation process film is treated with plasma for improving metal adhesion and barrier properties. Metallised side is specifically designed for excellent surface treatment retention behaviour as well as very good anchorage with lamination adhesives. 18,20 μ
  • Very High Sealing Strength and Outstanding Hot Tack Properties
  • Excellent Surface Gloss on Metallised Side
  • Very Good Water Vapour and Gas Barrier Properties
  • Excellent Adhesion of Aluminium
  • Very Good Anchorage of Lamination Adhesive on Metallised Side
  • Very Good Metal Bond Strength
  • Very Good Lamination Bond Strength
  • Excellent Machinability
  • Very Good Hot-Tack and Seal Strength
High Heat Seal Strength Sealable Metallised Film for Single / Two Ply Packaging Structure. Potential Replacement of Metallised CPP in few Structures.
N1-TMD Metallised, Non Heat Sealable, OPP Film for use in Pressure Sensitive Adhesive Tape Manufacturing Application. The metallised surface is specifically designed for excellent anchorage of various solvent and water based pressure sensitive adhesive used for self Adhesive tape manufacturing. Untreated side is back treatment free, which facilitate the trouble free unwinding of adhesive coated jumbo rolls 23,25,29 μ
  • Excellent metal appearance
  • Excellent Anchorage of Various Pressure Sensitive Adhesives on metal Side
  • Back Treatment Free
  • Excellent Machinability,
  • Excellent Mechanical Properties
  • Excellent Dimensional Stability
Pressure Sensitive Adhesive BOPP Metallised Tape